Mukhyamantri Niji Nalkoop Yojana is a Bihar Government irrigation subsidy scheme launched to help farmers install private tube wells and motor pumps for agricultural irrigation. Under this scheme, eligible farmers receive subsidy support for boring work and pump installation through the Aadhaar-based DBT process. The scheme mainly targets unirrigated farming areas where agriculture still depends heavily on rainfall and irregular monsoon conditions.
Bihar Mukhyamantri Niji Nalkoop Yojana Highlights | |
|---|---|
| Scheme Name | Mukhyamantri Niji Nalkoop Yojana |
| Programme | Saat Nishchay-2 – Har Khet Tak Sinchai Ka Pani |
| Department | Laghu Jal Sansadhan Vibhag (Minor Water Resources Department), Government of Bihar |
| Scheme Type | Agricultural Irrigation Subsidy Scheme |
| Target | 30,000 private tube wells (Official PDF) / 35,000 (Official Portal) |
| Maximum Total Grant | Rs. 91,200/- (SC/ST category – 5HP pump + 70m depth boring) |
| Minimum Land Required | 0.40 Acre (40 Dismil) |
| Minimum Boring Depth | 15 Metres (subsidy valid only if at least 15m depth achieved) |
| Claim Deadline | 60 days after approval (maximum 1-month extension in genuine cases) |
| Subsidy Transfer Mode | Aadhaar-based DBT to the farmer’s bank account |
| Official Portal | mwrd.bihar.gov.in/ |
Introduction of Bihar Mukhyamantri Niji Nalkoop Yojana: A Brief Insight
Mukhyamantri Niji Nalkoop Yojana is an irrigation subsidy scheme launched by the Bihar Government through the Minor Water Resources Department to help farmers install private tube wells and motor pumps for agricultural irrigation purposes. The scheme mainly targets farmers living in unirrigated areas where farming activities still depend heavily on rainfall and irregular monsoon conditions.
The Bihar Government introduced this scheme under the “हर खेत तक सिंचाई का पानी” initiative with the objective of expanding irrigation facilities across the state. Through this scheme, eligible farmers receive subsidy support for boring work as well as motor pump installation so that agricultural activities can continue smoothly during low rainfall situations. The department mainly supports shallow and medium-depth private tube wells up to 70 metres under prescribed technical conditions.
One of the biggest advantages of Mukhyamantri Niji Nalkoop Yojana is that the subsidy amount varies according to the farmer category. General category farmers can receive up to 50% subsidy, Backward Class and Extremely Backward Class farmers can receive up to 70% subsidy, while Scheduled Caste and Scheduled Tribe farmers can receive up to 80% subsidy support under official limits. The scheme also supports 2 HP, 3 HP, and 5 HP motor pump categories.
The scheme follows a two-stage process instead of direct subsidy release after application. In the first stage, the farmer submits an online application and receives departmental approval after land verification and physical inspection. In the second stage, the farmer completes boring and motor pump installation work and then uploads claim documents, GST vouchers, and photographs on the portal for subsidy verification and DBT payment.
According to official implementation guidelines, the Bihar Government plans large-scale private tube well installation under the scheme to improve irrigation access in farming regions. Farmers must complete boring work within prescribed timelines after approval, and departmental officials physically verify boring depth, water discharge condition, and motor installation before releasing the subsidy into Aadhaar-linked bank accounts.
Mukhyamantri Niji Nalkoop Yojana also becomes important for farmers already benefiting from agricultural support schemes such as Jannayak Karpoori Thakur Kisan Samman Nidhi Yojana and PM Kisan Samman Nidhi Yojana. While those schemes mainly provide direct financial assistance to farmers, Mukhyamantri Niji Nalkoop Yojana focuses specifically on strengthening long-term irrigation infrastructure for agricultural productivity.
Farmers can apply online through the official Minor Water Resources Department portal by uploading Aadhaar details, LPC documents, caste certificate, photographs, and other required documents. The department verifies all information physically before approving the scheme.
Mukhyamantri Niji Nalkoop Yojana has become one of the important irrigation support initiatives for Bihar farmers because proper irrigation access may help improve farming stability, crop productivity, and agricultural sustainability across different crop seasons. Farmers who want to explore more agriculture, subsidy, pension, housing, and welfare initiatives can also visit our All Bihar Government Schemes List section for more scheme-related information and updates.
Benefits Provided to Eligible Beneficiaries
Mukhyamantri Niji Nalkoop Yojana helps Bihar farmers install private tube wells and irrigation systems with government subsidy support. The scheme mainly benefits farmers living in unirrigated areas where agriculture still depends heavily on rainfall and irregular monsoon conditions.
- Farmers receive government subsidy support for private boring installation
- The scheme also provides subsidy assistance for motor pump purchase and installation
- General category farmers can receive up to 50% subsidy under the prescribed limits
- Backward Class and Extremely Backward Class farmers can receive up to 70% subsidy
- Scheduled Caste and Scheduled Tribe farmers can receive up to 80% subsidy support
- Subsidy benefit remains available for boring work up to a maximum of 70 metres depth
- The scheme supports the installation of 2 HP, 3 HP, and 5 HP motor pumps
- Farmers can improve irrigation access for crops during low rainfall conditions
- The scheme helps reduce dependence on monsoon-based farming
- Better irrigation facilities may help farmers improve crop productivity and farming stability
- Subsidy amount transfers directly into Aadhaar-linked bank accounts through the DBT process
- Small and marginal farmers receive priority under the scheme
- Both shallow and medium-depth boring categories receive support under official guidelines
One of the biggest advantages of Mukhyamantri Niji Nalkoop Yojana is that farmers receive long-term irrigation support for agricultural activities instead of temporary seasonal assistance. Proper irrigation access may help farmers cultivate crops more efficiently throughout different farming seasons.
How Much Subsidy Will Farmers Get Under Mukhyamantri Niji Nalkoop Yojana?
The Bihar Government provides separate subsidy support for boring work and motor pump installation under Mukhyamantri Niji Nalkoop Yojana. Subsidy amount depends upon the farmer category, boring depth, and motor pump capacity selected under the scheme.
Boring Subsidy Structure
| Category | Subsidy Per Metre | Maximum Depth Covered |
|---|---|---|
| General Category | ₹600 Per Metre | Up to 70 Metres |
| BC/EBC Category | ₹840 Per Metre | Up to 70 Metres |
| SC/ST Category | ₹960 Per Metre | Up to 70 Metres |
Motor Pump Subsidy Structure
| Motor Pump Capacity | General Category | BC/EBC Category | SC/ST Category |
|---|---|---|---|
| 2 HP | ₹10,000 | ₹14,000 | ₹16,000 |
| 3 HP | ₹12,500 | ₹17,500 | ₹20,000 |
| 5 HP | ₹15,000 | ₹21,000 | ₹24,000 |
According to official guidelines, subsidy remains available only for boring work up to a maximum depth of 70 metres. Farmers should also ensure that boring depth reaches a minimum of 15 metres because the subsidy does not remain valid below the prescribed minimum depth.
Eligibility Conditions Required to be Fulfilled
Mukhyamantri Niji Nalkoop Yojana mainly targets farmers living in unirrigated areas of Bihar who want to install private tube wells for irrigation purposes. The Bihar Government provides subsidy support for boring and motor pump installation under the scheme after verification of land, groundwater conditions, and eligibility criteria.
- The applicant must be a permanent resident farmer of Bihar
- The farmer should possess agricultural land suitable for boring installation
- Minimum 0.40 acre (40 dismil) agricultural land is required under the scheme
- Small and marginal farmers receive priority during the selection process
- The proposed boring site should fall within the eligible unirrigated areas
- Applications from Over Exploited and Critical groundwater blocks or panchayats identified by the Central Ground Water Board are not eligible
- No previous boring should already exist at the proposed installation site
- The farmer should not have previously received subsidy or financial assistance for boring work on the same land from the Agriculture Department or any other institution
- Subsidy remains valid only if the boring depth reaches at least 15 metres
- One farmer can receive subsidy benefits for only one boring and one motor pump set under the scheme
- The applicant must possess an Aadhaar-linked bank account for DBT payment
- The farmer should agree to the physical verification and inspection process conducted by departmental officials
The department verifies all eligibility conditions through document verification, field inspection, Aadhaar authentication, and physical site verification before approving Mukhyamantri Niji Nalkoop Yojana.
Documents Required to be Attached
Farmers need to upload different documents during the application stage as well as during the subsidy claim stage under Mukhyamantri Niji Nalkoop Yojana. The Bihar Government verifies land ownership, Aadhaar details, caste category, boring work, and pump installation before releasing subsidy through DBT.
Documents Required During Application Process
- Aadhaar Card of the applicant farmer
- Land Possession Certificate (LPC)
- Caste Certificate issued by the competent authority
- Mobile Number linked with Aadhaar
- A passport-size photograph of the farmer
- Photograph of the identified boring site
- Self Declaration stating that no previous boring subsidy has been taken for the same land
According to the official portal instructions, the LPC document should not be older than 01 January 2023. Farmers also need to upload documents in supported formats, such as JPEG or PNG, wherever applicable.
Documents Required During the Subsidy Claim Process
- GST Voucher for Motor Pump
- GST Voucher for PVC Pipe and other materials used
- Photographs before boring work
- Photographs during boring work with water discharge
- Photographs after boring completion with water flow
- Motor Pump installation photographs
- Water discharge photographs after motor installation
Important Photo Upload Conditions
- Photographs should clearly show the boring site and water discharge condition
- Latitude and longitude details may be verified during inspection
- Department officials may remain present during the physical verification process
- Farmers should keep original bills and vouchers safely for verification purposes
The department verifies all uploaded documents and claim-related photographs physically before approving the subsidy under the scheme. Farmers should upload only genuine documents because incorrect information may lead to claim rejection or cancellation of the application.
How Beneficiaries Can Apply to Avail the Benefit of this Scheme
Mukhyamantri Niji Nalkoop Yojana works in two major stages. In the first stage, the farmer applies online and receives departmental approval after verification. In the second stage, the farmer completes boring and motor pump installation work and then uploads subsidy claim documents on the portal for physical verification and DBT payment.
Phase 1: Application and Approval Process
Step 1: First, visit the official Mukhyamantri Niji Nalkoop Yojana Portal.
Step 2: Click on the “कृषक आवेदन करें” option available on the portal homepage.
Step 3: Enter personal details carefully, such as farmer name, address, Aadhaar number, mobile number, land details, and category information.
Step 4: Complete the Aadhaar verification and mobile number authentication process through OTP verification.
Step 5: Upload all required documents, including Aadhaar Card, LPC, caste certificate, photographs, and self-declaration in prescribed formats such as JPEG or PNG.
Step 6: Carefully read the declaration section available on the portal and tick the required consent option before final submission.
Step 7: Verify all entered details carefully because the department does not allow modification after the final submission of the application.
Step 8: Submit the application form online and keep the application reference details safe for future tracking.
Step 9: Departmental officials, such as Junior Engineer (JE) and Assistant Engineer (AE) may conduct site inspection, land verification, Aadhaar authentication, and eligibility verification before approval.
Step 10: After successful verification, the department sends approval information through SMS or departmental communication.
Phase 2: Boring Work and Subsidy Claim Process
Step 1: After receiving approval, the farmer must complete boring work at the approved site within 60 days according to official guidelines.
Step 2: Purchase ISI/BIS standard materials such as PVC pipes and motor pumps according to scheme specifications.
Step 3: Carry out boring installation work and maintain all GST vouchers and bills related to pipes, boring materials, and motor pumps.
Step 4: Take photographs before boring, during boring with water discharge, and after boring completion as required by the department.
Step 5: Install the approved motor pump set and take additional photographs showing motor installation and water discharge condition.
Step 6: Upload subsidy claim documents, GST vouchers, and all required photographs on the Mukhyamantri Niji Nalkoop Yojana Portal.
Step 7: Department officials physically verify boring depth, water flow, pump capacity, and installation work at the site.
Step 8: After successful verification, the subsidy amount transfers directly into the farmer’s Aadhaar-linked bank account through DBT process.
Important Things Farmers Should Know
- One farmer can receive a subsidy for only one boring and one motor pump set
- Subsidy remains valid only if the boring depth reaches at least 15 metres
- Farmers can upload the boring claim and the motor pump claim separately or together
- If the farmer fails to complete work within 60 days, the application may be automatically cancelled
- Executive Engineer may provide a maximum one-month extension in genuine cases
- Rejected claims may be corrected and resubmitted once within the prescribed period
- Only ISI/BIS standard materials manufactured in India should be used under the scheme
Farmers should upload genuine information, correct photographs, and proper GST vouchers because the department conducts physical inspection and verification before releasing subsidies under Mukhyamantri Niji Nalkoop Yojana.
How Does Mukhyamantri Niji Nalkoop Yojana Actually Work?
Mukhyamantri Niji Nalkoop Yojana does not work like a direct cash assistance scheme where the subsidy is received immediately after application. The Bihar Government follows a step-by-step verification and claim process before releasing the subsidy amount under the scheme.
In the first stage, the farmer applies online through the official portal by uploading Aadhaar details, LPC, caste certificate, photographs, and other required documents. Departmental officials then verify land details, groundwater conditions, Aadhaar information, and boring site eligibility before approving.
After approval, the farmer enters the second stage, where boring work and motor pump installation take place. The farmer must complete boring installation within the prescribed timeline and upload GST vouchers, boring photographs, motor pump photographs, and claim documents on the portal.
Department officials physically inspect the boring site, measure boring depth, verify water discharge conditions, and check motor pump installation before approving subsidy payment. After successful verification, the subsidy amount transfers directly into the Aadhaar-linked bank account of the farmer through the DBT process.
This two-stage process helps the Bihar Government ensure that subsidy benefits reach genuine farmers after actual boring and irrigation installation work is completed successfully.
Which Photos Must Farmers Upload to the Portal?
The Bihar Government makes photograph upload mandatory during the subsidy claim process under Mukhyamantri Niji Nalkoop Yojana. Farmers need to upload clear photographs related to boring work, water discharge condition, and motor pump installation for physical verification.
- Photograph before starting boring work
- Photograph during the boring process
- Photograph after boring completion with water discharge
- Motor pump installation photograph
- Photograph showing water flow after motor pump installation
- Site photographs may include latitude and longitude verification details
Department officials physically verify uploaded photographs along with site inspection before approving subsidy amount. Farmers should upload clear and genuine photographs because incorrect or unclear images may delay verification or lead to rejection of the subsidy claim.
Common Mistakes Farmers Should Avoid During Application
Many farmers face delays or rejection under Mukhyamantri Niji Nalkoop Yojana because of incorrect documents, incomplete claim uploads, or technical mistakes during the application process. Farmers should carefully verify all details before submitting an application or subsidy claim on the portal.
- Uploading old or invalid LPC documents
- Entering incorrect Aadhaar or bank account details
- Uploading unclear or incomplete photographs
- Failing to upload GST vouchers for pipes and motor pumps
- Using non-ISI or non-BIS standard materials
- Applying for a boring site where a previous subsidy already exists
- Missing the 60-day boring completion timeline after approval
- Uploading incorrect category or caste certificate details
- Submitting a claim without proper water discharge photographs
Farmers should carefully follow official guidelines and upload genuine information because the department conducts physical verification before releasing subsidies through the DBT process.
Important Links Available
- Bihar Minor Water Resources Department Official Website.
- Mukhyamantri Niji Nalkoop Yojana Official Page.
- Mukhyamantri Niji Nalkoop Yojana Online Portal.
- How to Apply for Mukhyamantri Niji Nalkoop Yojana.
- Bihar DBT Agriculture Portal.
- Bihar Mukhyamantri Niji Nalkoop Yojana Guidelines.
Contact Details in Case of Help Needed
- Minor Water Resources Department, Government of Bihar :-
- Address: Vikas Bhawan, Bailey Road, Patna, Bihar
- Email ID: secy-minorirrigation-bih@nic.in
- Farmers can also contact their concerned Junior Engineer (JE), Assistant Engineer (AE), or Executive Engineer of the Minor Water Resources Department for local assistance related to the application, verification, and subsidy claim process
- Official Contact Page.
Frequently Asked Questions (FAQs)
Q. What is Mukhyamantri Niji Nalkoop Yojana?
Ans. Mukhyamantri Niji Nalkoop Yojana is a Bihar Government irrigation subsidy scheme that helps farmers install private tube wells and motor pumps for agricultural irrigation purposes.
Q. Which department implements Mukhyamantri Niji Nalkoop Yojana?
Ans. The Minor Water Resources Department, Government of Bihar, implements and monitors the scheme.
Q. Who can apply under Mukhyamantri Niji Nalkoop Yojana?
Ans. Eligible farmers of Bihar possessing a minimum of 0.40 acre (40 dismil) agricultural land can apply under the scheme, subject to official conditions.
Q. How much subsidy can farmers receive under the scheme?
Ans. General category farmers can receive up to 50% subsidy, BC/EBC farmers up to 70% subsidy, and SC/ST farmers up to 80% subsidy under the prescribed boring and motor pump limits.
Q. Is there any minimum boring depth requirement?
Ans. Yes. Subsidy remains valid only if the boring depth reaches at least 15 metres according to official guidelines.
Q. Can farmers receive a subsidy for more than one boring?
Ans. No. One farmer can receive subsidy benefits for only one borewell and one motor pump set under Mukhyamantri Niji Nalkoop Yojana.
Q. What happens after application approval?
Ans. After approval, the farmer must complete boring installation work within 60 days and upload claim documents, photographs, and GST vouchers on the portal for subsidy verification.
Q. Can the boring claim and motor pump claim be uploaded separately?
Ans. Yes. Farmers can upload a boring claim and a motor pump subsidy claim either separately or together according to their convenience within the prescribed period.
Q. How does the subsidy amount reach farmers?
Ans. The Bihar Government transfers the subsidy amount directly into the Aadhaar-linked bank account of the farmer through the DBT process after successful verification.
Q. What happens if the claim gets rejected?
Ans. Farmers can correct the rejected claim and resubmit it once within the prescribed period according to official guidelines.
Q. Is Mukhyamantri Niji Nalkoop Yojana part of Saat Nishchay-2?
Ans. Yes. Mukhyamantri Niji Nalkoop Yojana is implemented under the Bihar Government’s flagship Saat Nishchay-2 programme with the mission of “हर खेत तक सिंचाई का पानी” – ensuring irrigation water reaches every agricultural field in Bihar.
Q. What are the ISI/BIS standards required for materials?
Ans. PVC casing and screen pipes must conform to IS 12818/1992. Submersible motor pump sets must conform to IS 8034/2018. Centrifugal motor pumps must follow IS 6595 (Part I)/2018 and IS 9079/2018. All materials must be manufactured in India.
Tabassum is a government schemes researcher and writer with 5 years of experience tracking Central and State welfare programmes across India. She has covered 500+ schemes spanning agriculture, women welfare, education, and housing, helping lakhs of beneficiaries understand their entitlements in simple language.